Sale!

Raj Green Smooth Sawn Honed 900×600 Natural Sandstone Paving Slabs – 18.5m2 Patio Pack

£403.81 £499.32

From £26.99 per M2

Sample and Split Packs available to purchase under Options below.

From £26.99 per m2
Order Sample

Product Description

Smooth Sawn Honed Raj Green 900×600 Pack

Raj Green Natural Indian Sandstone comprises an array of olive green, grey and brown tonal variations to blend seamlessly into your garden. This paving works well as part of a floral garden and can hold its own to be a prominent garden feature. With a 20mm thickness that has been Honed giving it that desirable Smooth finish with the Sawn Edge giving it that contemporary and modern look.

Thickness: 20mm

Country of origin: India

Pack Size: 18.5m2 coverage: 33 Slabs

When laid using a Joint 10-20mm

We always recommend following the 10% rule of ordering an additional 10% of paving to account for any offcuts and breakages that may happen in transit or when your paving starts to be installed.

If you have any questions regarding this product, please contact us on [email protected]

The paving samples are an offcut of the selected product and are aimed at giving an idea of the colours and textures. (typical sample size is 75mmx75mm or 100mmx100mm – sizes can vary)

  • We aim to deliver all orders within 5-7 working days from receipt of order.
  • Next day delivery is available at an extra charge per pallet.
  • Deliveries will be made by a third party courier with a 18-24 ton vehicle using a tail lift and manual pump truck therefore we advise this will be a kerbside drop only.
  • Deliveries can be made anytime between 8am and 6pm and we request that someone is present to sign for the delivery.
  • Please ensure the route to your property is accessible to a 18-24 ton vehicle.  Where access is unsuitable for this size vehicle please call our sales team for advice.
  • Any failed deliveries which require redelivering will incur a charge.

For more information please read our delivery page or contact our sales team on 01782 541605

Smooth Indian Sandstone is an ideal choice for domestic and commercial use.  Extracted from quarries, with natural textures and formations, the stone is then cut down then sawn to get the desired smooth finish.

As this is natural stone, it is very common to get natural imperfections within the stone such as chips or dimples on the slabs and occasional saw marks on the surface from the process the stone goes through.  These are perfectly normal in this type of product and does not impact the performance of the paving.

Variations in tones and colours throughout the paving is also a common feature as well as veining which adds to the appeal of the slabs.

If you are looking for a more uniform paving without the imperfections then we recommend looking at our Vitrified Porcelain range.

Samples are available to purchase on the dropdown menu of each product.

 

 

 

Natural Sandstone is a highly porous material which if laid incorrectly can cause problems overtime.

Reflective Staining is a common occurrence in Smooth Indian Sandstone which has been laid incorrectly.  Laying the slabs on a bed which has been ‘spotted’ or not using a SBR cement slurry primer on the bottom of the slabs prior to laying are the most common reasons why this can occur in Smooth Indian Sandstone.

When laying this paving the slabs must be laid on a full bed of sand and cement mortar.  The slab must make full contact with the mortar and should never be ‘spotted’ by just dotting the mortar.  ‘Spotting’ the slabs can also cause gaps in the mortar under the slabs which can create a weakness in the slabs.

Creating a slurry with our SBR Cement Slurry Primer and adding this to the back of the slabs prior to laying not only helps with adhering the slabs to the mortar but can also help to prevent Reflective Staining.

All natural sandstone paving requires sealing once laid to protect the slabs however we recommend testing all sealers on a small, inconspicuous area first.

Avoid using any acid-based products as this can ruin the stone.

 

The paving samples are an offcut of the selected product and are aimed at giving an idea of the colours and textures.

Typical sample size is 75mm x 75mm or 100mm x 100mm – sizes can vary.

  • We ask that all customer add on an additional 10% (15% for Rainbow Sandstone) of paving to the amount they require when ordering to account for any breakages which could happen in transit or to use as off cuts.
  • We will only replace damages over 10% of the full order. (15% for Rainbow Sandstone)
  • Customers should check the full order upon delivery and inform us of any damages with photographs within 24 hours.
  • Replacements will only be sent as per our Terms and Conditions upon receipt of proof of damages.
  • Natural stone products have colour variations, iron flecks, textures, rivens, markings and tones throughout the paving. Natural markings such as sawn markings, hairline fractures/veins and unique flecks within the paving is natural and must be accepted. These do not defer the quality of the stone and does not make the paving unusable.

Additional Information

Weight N/A
Options

10.80m2 Split Pack, 16.20m2 Split Pack, 18.5m2 Full Pack

You may also like…

  • EASYSeal Sandstone Sealer & Protector 5 Litre Tub

    £47.00 £47.00 *ONLY Available when purchased with a Pack of Paving*
    Add to basket
  • Pointfix Resin Jointing Compound 20kg – Mushroom

    £39.50
    Add to basket